Direct Injection fuel system upgrades for the B58 Gen 1 are finally here! Precision Raceworks Stage 1 and Stage 2 injectors are for those looking to push their B58 Gen 1 to the next level without the need for port injection!

Inside the box, you will find everything you need to get your new injectors installed quickly, including detailed installation instructions. When you are ready to tune, we have injector tuning data available for your tuner. Being that everything is installed like a factory part, there's no need to worry about secondary injection controllers, filling meth tanks, clogged meth injectors, or any of the other complex solutions people use to squeeze more power out of these vehicles. Additionally, these injectors are operating with all the OEM ECU's engine management system diagnostics and safety functions - resulting in a much happier and responsive system!

This product is backed by a limited lifetime warranty. Our products are comprehensive solutions that come complete with everything you need inside the box, including detailed installation instructions. Tuning guides are also available for your tuner. We have customer service on staff to provide you with any support that you may need, from installation to tuning.

• 35% larger than stock B58 Gen 1
• Direct Fit, no harness or spacers required
• Ethanol Compatible
• OEM equivalent spray pattern
• Every injector is tested statically and dynamically to ensure the best quality product and set batching
• Includes comprehensive installation guide

• 66% larger than stock B58 Gen 1
• Direct Fit, no harness or spacers required
• Ethanol Compatible
• OEM equivalent spray pattern
• Every injector is tested statically and dynamically to ensure the best quality product and set batching
• Includes comprehensive installation guide

FAQ

Will these work in a Gen 2 B58?

The Gen 1 injectors are intended for use only with the Gen 1 B58. The Gen 2 B58 (like found in the SUPRA), uses a 450 bar high pressure fuel system from the factory, where as the Gen 1 engine uses a 250 bar system.

I see a lot of mentions about OEM equivalent spray patterns. What does that mean and why is it important?

While increasing flow rate is critical to making more horsepower, there are other factors to consider when choosing fuel system upgrades. A bigger injector isn't always a better injector! It can flow a large volume of fuel at WOT, but if the spray pattern is poor, you can expect poor idle quality, poor drivability, increased knock propensity, soot, NVH (noise vibration harshness,) and tuning difficulty. Additionally, the wrong spray pattern can result in liquid fuel impinging in the cylinder walls, causing oil dilution, which increases mechanical wear to internal engine components.

Precision Raceworks is committed to providing only quality products, and has developed partnerships to deliver an OEM level of quality on our injectors.

• WHP Potential - Gasoline: 780 WHP*
• WHP Potential - E85: 630 WHP*
• Tune Required: YES
• Flow Rate: 14.1 g/s at 100 bar
• Flow Rate over stock: 35%
• Max Operating Pressure: 220 bar / 22 MPa / 3200 psi

• WHP Potential - Gasoline: 880 WHP*
• WHP Potential - E85: 700 WHP*
• Tune Required: YES
• Flow Rate: 17.3 g/s at 100 bar
• Flow Rate over stock: 66%
• Max Operating Pressure: 220 bar / 22 MPa / 3200 psi

• Bmw 340i 2016 to 2019
• Bmw 340i Xdrive 2016 to 2019
• Bmw 440i 2017 to 2020
• Bmw 440i Xdrive 2017 to 2020
• Bmw 540i 2017 to 2019
• Bmw 540i Xdrive 2017 to 2019
• Bmw 640i Xdrive 2018 to 2019
• Bmw 740i 2016 to 2019
• Bmw 740i Xdrive 2016 to 2019
• Bmw M240i 2017 to 2021
• Bmw M240i Xdrive 2017 to 2021
• Bmw X3 M40i Xdrive 2018 to 2019
• Bmw X4 M40i Xdrive 2018 to 2019

Feel free to contact us at info@mlperformanceeu.com should you wish to double check!

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

PR-201-0425 (Stage 1 (14.1 g/s))

PR-201-0426 (Stage 2 (17.3 g/s))

Manufactured by

Precision Raceworks